I took my 2 gigahertz solutions EMF and RF meters on the train and into Brisbane City to check how much radiation was coming from the electric trains and from phone towers in the city. I knew the readings would be high but I was not prepared for just how high they were. Constantly well over what my meters could read!
When I do an EMF-X analysis in a home or office Im mainly checking for electric and magnetic fields, radio frequencies from cell towers, wifi and cordless phones, dirty electricity and I perform a body voltage test.
I do all of these except the dirty electricity in this video.
Body voltage should be as close to zero as possible, outside of your home generally you would be about 2-10 millivolts, inside I would expect 300-800 millivolts. If your home is elevated you might be 3-11 Volts!
Electric fields should be below 10V/m if you are going to be exposed for prolonged time.
Magnetic fields should be below 200 nanoTeslas.
RF ideally is below 1000 microWatts/m2 outdoors and below 100 micorWatts/m2 indoors (according to the bio-initiative report 2007-11).
As the video show, all of the reading taken on this day, 3rd July 2012 were much higher than these precautionary levels.
EMF's are very dangerous, we are playing a game of Russian roulette when we immerse ourselves in these frequencies for prolonged periods. If you work in the city, especially if you are also using the train, your exposure to carcinogenic fields is very real!!
find out more at: emfx.com.au